Basic Info.
Microphone
Without Microphone
Wire Material
Anti-Radiation
Product Description
PL-118 Bluetooth headset base charger for iPhone
Contents
Introduction
Thank you for purchasing the VV-01. Together with Bluetooth mobile phones and other Bluetooth embedded devices. The Bluetooth telephone VV-01 allow you freedom to make and receive calls while on the move or in the office, you can connect the product to a compatible phone that supports Bluetooth wireless technology. Please read the user manual to make the best use of this VV-01 and its many features.
Bluetooth wireless technology
Bluetooth wireless technology makes it possible to connect compatible communication devices without using cables. A Bluetooth connection does not require that the phone and the product be in line of sign, but both devices should be within 10 meters(30 feet) of each other. Connection can be subject to interference from obstructions, such as walls or other electronic devices.
The product is compliant with Bluetooth Specification 2.0 supporting the following profiles:
There may be restrictions on using Bluetooth technology in some locations. Check with you local authorities or service provider.
Get started
*Overview
Before you start using the VV-01, you must charge the battery and pair the headset with a compatible phone.
Note: Parts of the product are magnetic, metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.
*Switch the headset on or off
To switch on, press and hold the answer/end key for 3 seconds. The blue indicator light starts to flash.
To switch off, press and hold the power key for 4 seconds until headset beeps 2 times and the red indicator light is displayed briefly.
*Pair the headset with a compatible phone
1. Make sure your headset is turn off
2. Press the answer/end key for 6 seconds until the blue and red light flashes alternately
3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions
4. Select the VV-01 from the list of found devices
5. Enter the password 0000 to pair and connect the headset to your phone. In some phones you may need to make the connection separately after pairing. See the user guide of your phone for details. You only need to pair the headset with your phone once
6. If the pairing is successful, the headset's blue light will flash 3 times briefly for the first time follow by a single flash every 7 seconds. The product's name appears in the phone menu where you can view the currently paired Bluetooth devices.
3. Basic use
*Call handing
Answer a call
Just press answer/end key one time to answer a call.
End a call
Use either of the following methods to end a call.
Method-1 press answer/end key one time to end a call
Method-2 end a call from the mobile phone's keypad.
Adjust volume
You can press the two-direction button of volume +/- key to adjust volume.
*Disconnect the headset from the phone
To disconnect the headset from your phone( for example, to connect the phone to another Bluetooth device), do one of the following:
Switch off the headset.
Disconnect the headset in the Bluetooth menu of your phone.
Move the headset more than 10 meter( 30 feet) away from the phone.
You do not need to delete the pairing with the headset to disconnect it.
*Troubleshooting
If you cannot connect the headset to your phone, do as follows:
Ensure that the Bluetooth feature is activated on your phone.
Check that the headset is within 10 meter(30 feet) of your phone and that there are no obstructions between the headset and the phone, such as walls or other electronic decices.
4. Battery information
Your device is powered by a rechargeable battery. The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.,
Address:
Room 1532, Hongyu Mansion, No. 2 Donghuang Road, Baoan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics
Management System Certification:
EICC, ISO 9000, OHSAS/ OHSMS 18001
Company Introduction:
We sincerely hope establishing long and friendly business relations with clients from all over the world. Our goal is not just providing product, but also providing a complete solution including product design, tooling, fabrication and service for our customers to achieve their upmost satisfaction.
We stick to the principle of "quality first, service first, continuous improvement and innovation to meet the customers" for the management and "zero defect, zero complaints" as the quality objective. To perfect our service, we provide the products with the best quality at the reasonable price.